Archive for wirtgen
Kokosing Construction with Wirtgen W210
Posted by: | CommentsKokosing Construction Company recently purchased the latest in the state of the art of milling machines from The McLean Company. Kokosing purchased a Wirtgen W210 dual engine machine this past winter and put it to work this spring at the Cleveland Hopkins airport. This will make 5 Wirtgen machines that Kokosing has purchased from The McLean Company.
At Cleveland Hopkins airport they are shown milling a taxi-way. The first pass they milled was up to 9″ deep 72” wide and was milling an average of 36′ per minute. The second pass being a little harder aggregate they milled at 8.5″ depth and averaged 32′ per minute. They were very pleased with the production of the machine.
One unique feature is this W210 is designed with 2 engines and the onboard computer systems can determine the engine output for simple maneuvering and traveling. It may only require one engine in use; however as the demand for HP increases for milling applications the computer will put the second engine into action. This is a considerable fuel savings instead of running one higher HP engine at higher rpm’s all the time. Fuel savings can range up to 20-30% over the conventional drive train. The engine can run in 3 different work ranges manually. Kokosing opted to run it in the medium setting, which is 1800 rpm. Economy setting is 1600 rpm and high setting is 2100 rpm. They felt they got their best production at that setting.
Wirtgen’s exclusive Level Pro Multi-Plex non contact averaging system was utilized during the asphalt removal for more accuracy for profilograph requirements on smoothness asphalt paving. For more on the W210 and Level-Pro and for Kokosing Construction, see the attached link.
Chagrin Valley Paving Wirtgen W120F
Posted by: | CommentsPaul Phillips owner of Chagrin Valley Paving proudly stands by his new 2010 Wirtgen Milling machine model W120F, This machine is shown cutting a controlled depth of 1.25” deep on a street paving project utilizing the new Wirtgen dual grade and slope system Level Pro. The second section of the project shows roadway full removal of 9” deep. Paul decided on the Wirtgen because of its tremendous production capability and yet is sized right for mobilization with the folding conveyor feature and right hand rear corner location of the cutter head. Another feature of Chagrin Valley Paving’s W120F is the optional Flexible Cutter System (FCS) which will allow, if purchased (optional drums) to go to widths of 2 ft., 3 ft., and the standard 4 ft wide cutter head. The machine has the ability to cut over 12-13” deep in one pass. Paul with the purchase of the W120 became a 3 amigo customer owning Vogele, Hamm and Wirtgen Products purchased from The McLean Company. For more information on Chagrin Valley Paving see the attached link. For more information on the Wirtgen W120F FCS see the attached link.
http://www.chagrinvalleypaving.com
Wirtgen Group W120F
Posted by: | Comments
Wirtgen America Inc. will exhibit the new W 120 F at Conexpo-Con/Agg 2008 in Las Vegas in March.
Part of a new line of midsized mills, the W 120 F is a high-performance cold milling machine with a drum width of 48 inches (120 cm), ideal for removing complete asphalt courses with a milling depth of 0 to 12.6 inches (0 to 320 mm). Its engine output is 304 hp, and it replaces the W 1200 F/T in the product line.
The W 120 F has a hydraulic swinging track for flush cutting, and features front-end loading of reclaimed asphalt pavement (RAP) via a two-part conveyor system. The machine is available in a tracked version but can be ordered in a wheeled version.
The optional Flexible Cutter System (FCS) permits the use of different milling drums with working widths of up to 48 in. and a variety of line spacings. And the W 120 F will be equipped with the new Wirtgen Level Pro® leveling system.
Wirtgen also will exhibit the new WR 2000 XL recycler/stabilizer, with a 94-in. cutting drum and 425 hp engine.
